Tema: Sin sonido tras instalar Ubuntu 9.04 (SOLUCIONADO)

[kronnoxx]

güenas


y se supone k'has aktivao los repositorios non-free y demas no????


tb tiés instalaos the pluguin's libxine1-all-plugins ???



saluetes 

Lo acabo de instalar... no lo tenía instalado... y nada, sin sonido.

QUé es eso de los repositorios non free? en google veo que hay "repositorios medibuntu, non free codecs", te refieres a esos?

COn respecto a instalar otra "versión" de ubuntu, me gustaría aguantar un poco el tirón en esta a ver si se soluciona. Así podré dar la razón a Dabo y decir que merecía la pena marearos un poco jejej.

[kronnoxx]

¿Qué te dice el comando 'dmesg'?

  Pues un montón de cosas  

Código: [Seleccionar]

[    0.557225] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[    0.557227] bus: 01 index 0 io port: [0x9000-0x9fff]
[    0.557228] bus: 01 index 1 mmio: [0xf4000000-0xf40fffff]
[    0.557230] bus: 01 index 2 mmio: [0x0-0x0]
[    0.557232] bus: 01 index 3 io port: [0x00-0xffff]
[    0.557233] bus: 01 index 4 mmio: [0x000000-0xffffffffffffffff]
[    0.557235] bus: 02 index 0 io port: [0x6000-0x6fff]
[    0.557237] bus: 02 index 1 mmio: [0x0-0x0]
[    0.557238] bus: 02 index 2 mmio: [0x0-0x0]
[    0.557240] bus: 02 index 3 mmio: [0x0-0x0]
[    0.557241] bus: 03 index 0 io port: [0x8000-0x8fff]
[    0.557243] bus: 03 index 1 mmio: [0x0-0x0]
[    0.557244] bus: 03 index 2 mmio: [0x0-0x0]
[    0.557246] bus: 03 index 3 mmio: [0x0-0x0]
[    0.557247] bus: 04 index 0 io port: [0x7000-0x7fff]
[    0.557249] bus: 04 index 1 mmio: [0x0-0x0]
[    0.557250] bus: 04 index 2 mmio: [0x0-0x0]
[    0.557252] bus: 04 index 3 mmio: [0x0-0x0]
[    0.557253] bus: 05 index 0 io port: [0xa000-0xafff]
[    0.557255] bus: 05 index 1 mmio: [0xf0000000-0xf3ffffff]
[    0.557257] bus: 05 index 2 mmio: [0xc0000000-0xdfffffff]
[    0.557258] bus: 05 index 3 mmio: [0x0-0x0]
[    0.557268] NET: Registered protocol family 2
[    0.560017] Switched to high resolution mode on CPU 0
[    0.592057] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.592366] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.593526] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.594105] TCP: Hash tables configured (established 131072 bind 65536)
[    0.594108] TCP reno registered
[    0.604094] NET: Registered protocol family 1
[    0.604227] checking if image is initramfs... it is
[    1.173782] Freeing initrd memory: 7764k freed
[    1.178546] audit: initializing netlink socket (disabled)
[    1.178560] type=2000 audit(1245773052.176:1): initialized
[    1.186302] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.187402] VFS: Disk quotas dquot_6.5.1
[    1.187448] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.187948] fuse init (API version 7.10)
[    1.188034] msgmni has been set to 1976
[    1.188178] alg: No test for stdrng (krng)
[    1.188188] io scheduler noop registered
[    1.188190] io scheduler anticipatory registered
[    1.188192] io scheduler deadline registered
[    1.188227] io scheduler cfq registered (default)
[    1.188244] pci 0000:00:00.0: Enabling HT MSI Mapping
[    1.204087] pci 0000:00:0b.0: Enabling HT MSI Mapping
[    1.204096] pci 0000:00:0b.0: Found enabled HT MSI Mapping
[    1.204099] pci 0000:00:0b.0: Linking AER extended capability
[    1.204108] pci 0000:00:0c.0: Enabling HT MSI Mapping
[    1.204113] pci 0000:00:0c.0: Found enabled HT MSI Mapping
[    1.204115] pci 0000:00:0c.0: Linking AER extended capability
[    1.204124] pci 0000:00:0d.0: Enabling HT MSI Mapping
[    1.204130] pci 0000:00:0d.0: Found enabled HT MSI Mapping
[    1.204132] pci 0000:00:0d.0: Linking AER extended capability
[    1.204140] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    1.204145] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[    1.204147] pci 0000:00:0e.0: Linking AER extended capability
[    1.204196] pci 0000:05:00.0: Boot video device
[    1.209320] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[    1.209339] pcieport-driver 0000:00:0b.0: found MSI capability
[    1.209352] pcieport-driver 0000:00:0b.0: irq 2303 for MSI/MSI-X
[    1.209358] pci_express 0000:00:0b.0:pcie00: allocate port service
[    1.209372] pci_express 0000:00:0b.0:pcie03: allocate port service
[    1.209402] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[    1.209420] pcieport-driver 0000:00:0c.0: found MSI capability
[    1.209430] pcieport-driver 0000:00:0c.0: irq 2302 for MSI/MSI-X
[    1.209435] pci_express 0000:00:0c.0:pcie00: allocate port service
[    1.209445] pci_express 0000:00:0c.0:pcie03: allocate port service
[    1.209476] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[    1.209494] pcieport-driver 0000:00:0d.0: found MSI capability
[    1.209503] pcieport-driver 0000:00:0d.0: irq 2301 for MSI/MSI-X
[    1.209509] pci_express 0000:00:0d.0:pcie00: allocate port service
[    1.209519] pci_express 0000:00:0d.0:pcie03: allocate port service
[    1.209548] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[    1.209565] pcieport-driver 0000:00:0e.0: found MSI capability
[    1.209574] pcieport-driver 0000:00:0e.0: irq 2300 for MSI/MSI-X
[    1.209580] pci_express 0000:00:0e.0:pcie00: allocate port service
[    1.209590] pci_express 0000:00:0e.0:pcie03: allocate port service
[    1.209627] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.209634] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.209751] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.209753] ACPI: Power Button (FF) [PWRF]
[    1.209792] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.209794] ACPI: Power Button (CM) [PWRB]
[    1.210258] processor ACPI_CPU:00: registered as cooling_device0
[    1.240145] Linux agpgart interface v0.103
[    1.240153] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.240232] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.240304] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.240508] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.241147] brd: module loaded
[    1.241423] loop: module loaded
[    1.241492] Fixed MDIO Bus: probed
[    1.241497] PPP generic driver version 2.4.2
[    1.241550] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.241574] Driver 'sd' needs updating - please use bus_type methods
[    1.241582] Driver 'sr' needs updating - please use bus_type methods
[    1.241747] sata_nv 0000:00:07.0: version 3.5
[    1.242145] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    1.242154] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    1.242220] sata_nv 0000:00:07.0: setting latency timer to 64
[    1.242309] scsi0 : sata_nv
[    1.242403] scsi1 : sata_nv
[    1.242540] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 23
[    1.242543] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 23
[    1.964022] ata1: SATA link down (SStatus 0 SControl 300)
[    2.844026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.888844] ata2.00: ATA-7: ST3200827AS, 3.AAH, max UDMA/133
[    2.888847] ata2.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.963822] ata2.00: configured for UDMA/133
[    2.963853] isa bounce pool size: 16 pages
[    2.963920] scsi 1:0:0:0: Direct-Access     ATA      ST3200827AS      3.AA PQ: 0 ANSI: 5
[    2.964014] sd 1:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[    2.964030] sd 1:0:0:0: [sda] Write Protect is off
[    2.964032] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.964055] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.964113] sd 1:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[    2.964126] sd 1:0:0:0: [sda] Write Protect is off
[    2.964128] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.964150] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.964153]  sda: sda1 sda2 < sda5 >
[    3.029816] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.029857] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    3.030246] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[    3.030254] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[    3.030294] sata_nv 0000:00:08.0: setting latency timer to 64
[    3.030355] scsi2 : sata_nv
[    3.030406] scsi3 : sata_nv
[    3.030545] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe000 irq 22
[    3.030547] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe008 irq 22
[    3.908026] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.916113] ata3.00: ATAPI: HL-DT-STDVD-RAM GSA-H30N, 1.01, max UDMA/100
[    3.932123] ata3.00: configured for UDMA/100
[    4.656021] ata4: SATA link down (SStatus 0 SControl 300)
[    4.657752] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H30N 1.01 PQ: 0 ANSI: 5
[    4.779616] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.779619] Uniform CD-ROM driver Revision: 3.20
[    4.779714] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    4.779753] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    4.779827] pata_amd 0000:00:06.0: version 0.3.10
[    4.779862] pata_amd 0000:00:06.0: setting latency timer to 64
[    4.779932] scsi4 : pata_amd
[    4.779983] scsi5 : pata_amd
[    4.780694] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    4.780697] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    5.144240] ata5.00: HPA unlocked: 234439535 -> 234441648, native 234441648
[    5.144243] ata5.00: ATA-6: ST3120022A, 3.54, max UDMA/100
[    5.144245] ata5.00: 234441648 sectors, multi 16: LBA48
[    5.144269] ata5.01: ATAPI: TOSHIBA DVD-ROM SD-M1612, 1004, max UDMA/33
[    5.144288] ata5: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x1f)
[    5.144293] ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x1f)
[    5.160357] ata5.00: configured for UDMA/100
[    5.192281] ata5.01: configured for UDMA/33
[    5.358885] scsi 4:0:0:0: Direct-Access     ATA      ST3120022A       3.54 PQ: 0 ANSI: 5
[    5.358963] sd 4:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[    5.358978] sd 4:0:0:0: [sdb] Write Protect is off
[    5.358980] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.359002] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.359058] sd 4:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[    5.359071] sd 4:0:0:0: [sdb] Write Protect is off
[    5.359073] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.359095] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.359098]  sdb: sdb1 sdb2 < sdb5 sdb6 >
[    5.404158] sd 4:0:0:0: [sdb] Attached SCSI disk
[    5.404197] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    5.412308] scsi 4:0:1:0: CD-ROM            TOSHIBA  DVD-ROM SD-M1612 1004 PQ: 0 ANSI: 5
[    5.420853] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    5.420906] sr 4:0:1:0: Attached scsi CD-ROM sr1
[    5.420936] sr 4:0:1:0: Attached scsi generic sg3 type 5
[    5.421299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.421620] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[    5.421629] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[    5.421645] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    5.421648] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    5.421712] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    5.421738] ehci_hcd 0000:00:02.1: debug port 1
[    5.421741] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    5.421758] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
[    5.432024] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    5.432087] usb usb1: configuration #1 chosen from 1 choice
[    5.432113] hub 1-0:1.0: USB hub found
[    5.432120] hub 1-0:1.0: 10 ports detected
[    5.432395] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[    5.432402] ehci_hcd 0000:01:08.2: PCI INT C -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[    5.432411] ehci_hcd 0000:01:08.2: EHCI Host Controller
[    5.432446] ehci_hcd 0000:01:08.2: new USB bus registered, assigned bus number 2
[    5.432487] ehci_hcd 0000:01:08.2: irq 18, io mem 0xf400c000
[    5.444021] ehci_hcd 0000:01:08.2: USB 2.0 started, EHCI 1.00
[    5.444068] usb usb2: configuration #1 chosen from 1 choice
[    5.444091] hub 2-0:1.0: USB hub found
[    5.444098] hub 2-0:1.0: 4 ports detected
[    5.444168] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.444447] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[    5.444453] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[    5.444463] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    5.444465] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    5.444502] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[    5.444519] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf4102000
[    5.502052] usb usb3: configuration #1 chosen from 1 choice
[    5.502072] hub 3-0:1.0: USB hub found
[    5.502080] hub 3-0:1.0: 10 ports detected
[    5.502158] uhci_hcd: USB Universal Host Controller Interface driver
[    5.502382] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[    5.502388] uhci_hcd 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[    5.502395] uhci_hcd 0000:01:08.0: UHCI Host Controller
[    5.502439] uhci_hcd 0000:01:08.0: new USB bus registered, assigned bus number 4
[    5.502464] uhci_hcd 0000:01:08.0: irq 16, io base 0x00009000
[    5.502531] usb usb4: configuration #1 chosen from 1 choice
[    5.502559] hub 4-0:1.0: USB hub found
[    5.502565] hub 4-0:1.0: 2 ports detected
[    5.502820] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[    5.502825] uhci_hcd 0000:01:08.1: PCI INT B -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[    5.502830] uhci_hcd 0000:01:08.1: UHCI Host Controller
[    5.502866] uhci_hcd 0000:01:08.1: new USB bus registered, assigned bus number 5
[    5.502889] uhci_hcd 0000:01:08.1: irq 17, io base 0x00009400
[    5.502960] usb usb5: configuration #1 chosen from 1 choice
[    5.502982] hub 5-0:1.0: USB hub found
[    5.502988] hub 5-0:1.0: 2 ports detected
[    5.503085] usbcore: registered new interface driver libusual
[    5.503116] usbcore: registered new interface driver usbserial
[    5.503125] USB Serial support registered for generic
[    5.503136] usbcore: registered new interface driver usbserial_generic
[    5.503138] usbserial: USB Serial Driver core
[    5.503180] PNP: No PS/2 controller found. Probing ports directly.
[    5.506453] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.506458] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.516042] mice: PS/2 mouse device common for all mice
[    5.552064] rtc_cmos 00:04: RTC can wake from S4
[    5.552097] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    5.552118] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    5.552181] device-mapper: uevent: version 1.0.3
[    5.552282] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
[    5.552324] device-mapper: multipath: version 1.0.5 loaded
[    5.552326] device-mapper: multipath round-robin: version 1.0.0 loaded
[    5.552387] cpuidle: using governor ladder
[    5.552388] cpuidle: using governor menu
[    5.552770] TCP cubic registered
[    5.552836] NET: Registered protocol family 10
[    5.553161] lo: Disabled Privacy Extensions
[    5.553407] NET: Registered protocol family 17
[    5.553424] Bluetooth: L2CAP ver 2.11
[    5.553426] Bluetooth: L2CAP socket layer initialized
[    5.553428] Bluetooth: SCO (Voice Link) ver 0.6
[    5.553429] Bluetooth: SCO socket layer initialized
[    5.553453] Bluetooth: RFCOMM socket layer initialized
[    5.553461] Bluetooth: RFCOMM TTY layer initialized
[    5.553462] Bluetooth: RFCOMM ver 1.10
[    5.553478] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[    5.553519] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6
[    5.553520] powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12
[    5.553623] registered taskstats version 1
[    5.553782]   Magic number: 13:936:85
[    5.553862] rtc_cmos 00:04: setting system clock to 2009-06-23 16:04:17 UTC (1245773057)
[    5.553865] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    5.553866] EDD information not available.
[    5.553901] Freeing unused kernel memory: 536k freed
[    5.554151] Write protecting the kernel read-only data: 6708k
[    5.748035] usb 1-6: new high speed USB device using ehci_hcd and address 2
[    5.891465] usb 1-6: configuration #1 chosen from 1 choice
[    5.898187] Initializing USB Mass Storage driver...
[    5.912675] scsi6 : SCSI emulation for USB Mass Storage devices
[    5.916236] usbcore: registered new interface driver usb-storage
[    5.916240] USB Mass Storage support registered.
[    5.916345] usb-storage: device found at 2
[    5.916347] usb-storage: waiting for device to settle before scanning
[    6.046981] Floppy drive(s): fd0 is 1.44M
[    6.063835] FDC 0 is a post-1991 82077
[    6.259765] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[    6.260176] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[    6.260181] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[    6.260185] forcedeth 0000:00:0a.0: setting latency timer to 64
[    6.260250] nv_probe: set workaround bit for reversed mac addr
[    6.295743] ohci1394 0000:01:08.3: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[    6.348480] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[f400d000-f400d7ff]  Max Packet=[1024]  IR/IT contexts=[8/8]
[    6.370792] ohci1394 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[    6.420558] ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[f400e000-f400e7ff]  Max Packet=[4096]  IR/IT contexts=[4/8]
[    6.492034] usb 3-7: new full speed USB device using ohci_hcd and address 2
[    6.696209] usb 3-7: configuration #1 chosen from 1 choice
[    6.780941] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x3f1 @ 7, addr 00:14:85:8f:9e:27
[    6.780945] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
[    6.889493] PM: Starting manual resume from disk
[    6.889497] PM: Resume from partition 8:5
[    6.889498] PM: Checking hibernation image.
[    6.889741] PM: Resume from disk failed.
[    6.932040] kjournald starting.  Commit interval 5 seconds
[    6.932052] EXT3-fs: mounted filesystem with ordered data mode.
[    7.000027] usb 3-9: new low speed USB device using ohci_hcd and address 3
[    7.214119] usb 3-9: configuration #1 chosen from 1 choice
[    7.520028] usb 3-10: new low speed USB device using ohci_hcd and address 4
[    7.640121] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011060000000686]
[    7.738110] usb 3-10: configuration #1 chosen from 1 choice
[    7.764111] ieee1394: Host added: ID:BUS[1-00:1023]  GUID[00148556008f6a38]
[   10.916454] usb-storage: device scan complete
[   10.918050] scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
[   10.918795] scsi 6:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
[   10.919541] scsi 6:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
[   10.920167] scsi 6:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
[   10.921159] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[   10.921208] sd 6:0:0:0: Attached scsi generic sg4 type 0
[   10.921959] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[   10.921994] sd 6:0:0:1: Attached scsi generic sg5 type 0
[   10.922707] sd 6:0:0:2: [sde] Attached SCSI removable disk
[   10.922743] sd 6:0:0:2: Attached scsi generic sg6 type 0
[   10.923455] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[   10.923491] sd 6:0:0:3: Attached scsi generic sg7 type 0
[   11.828695] udev: starting version 141
[   12.022838] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[   12.022876] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[   12.089477] parport_pc 00:0a: reported by Plug and Play ACPI
[   12.089517] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   12.122264] Linux video capture interface: v2.00
[   12.237808] usbcore: registered new interface driver hiddev
[   12.243429] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-9/3-9:1.0/input/input3
[   12.272200] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-9/input0
[   12.282786] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-9/3-9:1.1/input/input4
[   12.328205] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-9/input1
[   12.340548] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:02.0/usb3/3-10/3-10:1.0/input/input5
[   12.368264] generic-usb 0003:046D:C50E.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:02.0-10/input0
[   12.368288] usbcore: registered new interface driver usbhid
[   12.368307] usbhid: v2.6:USB HID core driver
[   12.511352] gspca: main v2.3.0 registered
[   12.896501] nvidia: module license 'NVIDIA' taints kernel.
[   13.158781] nvidia 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[   13.158789] nvidia 0000:05:00.0: setting latency timer to 64
[   13.160148] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  180.44  Tue Mar 24 05:46:32 PST 2009
[   13.172103] cfg80211: Calling CRDA to update world regulatory domain
[   13.273363] cfg80211: World regulatory domain updated:
[   13.273367] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.273370] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.273372] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.273374] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.273376] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.273378] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.296408] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   13.337841] gspca: probing 046d:08ad
[   13.352772] ppdev: user-space parallel port driver
[   13.375825] usbcore: registered new interface driver lmpcm_usb
[   13.375847] lmpcm_usb: v0.5.5:USB Logitech MediaPlay Cordless Mouse driver
[   13.409724] saa7130/34: v4l2 driver version 0.2.14 loaded
[   13.412240] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[   13.412252] saa7134 0000:01:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[   13.412259] saa7133[0]: found at 0000:01:07.0, rev: 208, irq: 19, latency: 32, mmio: 0xf400f000
[   13.412264] saa7133[0]: subsystem: 11bd:002e, board: Pinnacle PCTV 40i/50i/110i (saa7133) [card=77,autodetected]
[   13.412316] saa7133[0]: board init: gpio is 200e000
[   13.564048] saa7133[0]: i2c eeprom 00: bd 11 2e 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   13.564056] saa7133[0]: i2c eeprom 10: ff e0 60 02 ff 20 ff ff ff ff ff ff ff ff ff ff
[   13.564063] saa7133[0]: i2c eeprom 20: 01 2c 01 02 02 01 04 30 98 ff 00 a0 ff 22 00 c2
[   13.564069] saa7133[0]: i2c eeprom 30: 96 ff 03 30 15 01 ff ff 0c 22 17 87 03 41 c2 8d
[   13.564074] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.564080] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.564086] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.564092] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.564097] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.564103] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.564109] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.564114] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.564120] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.564126] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.564132] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.564137] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.760114] tuner' 2-004b: chip found @ 0x96 (saa7133[0])
[   13.800970] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[   13.800975] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[   13.801154] Intel ICH 0000:00:04.0: setting latency timer to 64
[   13.848020] tda829x 2-004b: setting tuner address to 61
[   13.916018] tda829x 2-004b: type set to tda8290+75a
[   14.120018] intel8x0_measure_ac97_clock: measured 54706 usecs
[   14.120020] intel8x0: clocking to 46891
[   15.287037] zc3xx: probe 2wr ov vga 0x0000
[   15.359037] zc3xx: probe sensor -> 11
[   15.359039] zc3xx: Find Sensor HV7131R(c)
[   15.374161] gspca: probe ok
[   15.440563] usbcore: registered new interface driver snd-usb-audio
[   15.441089] usbcore: registered new interface driver zc3xx
[   15.441115] zc3xx: registered
[   17.776105] input: Pinnacle PCTV as /devices/virtual/input/input7
[   17.808070] ir-kbd-i2c: Pinnacle PCTV detected at i2c-2/2-0047/ir0 [saa7133[0]]
[   17.808272] saa7133[0]: registered device video1 [v4l2]
[   17.808314] saa7133[0]: registered device vbi0
[   17.808356] saa7133[0]: registered device radio0
[   17.874112] rt61pci 0000:01:06.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[   17.884039] saa7134 ALSA driver for DMA sound loaded
[   17.884072] saa7133[0]/alsa: saa7133[0] at 0xf400f000 irq 19 registered as card -2
[   17.886106] phy0: Selected rate control algorithm 'pid'
[   17.935670] Registered led device: rt61pci-phy0:radio
[   17.935708] Registered led device: rt61pci-phy0:assoc
[   18.043661] lp0: using parport0 (interrupt-driven).
[   18.129736] Adding 2963952k swap on /dev/sda5.  Priority:-1 extents:1 across:2963952k
[   18.670684] EXT3 FS on sda1, internal journal
[   19.729330] type=1505 audit(1245773071.674:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2378
[   19.775789] type=1505 audit(1245773071.718:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2382
[   19.775934] type=1505 audit(1245773071.718:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2382
[   19.775976] type=1505 audit(1245773071.718:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2382
[   19.776041] type=1505 audit(1245773071.722:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2382
[   19.902559] type=1505 audit(1245773071.846:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2387
[   19.902741] type=1505 audit(1245773071.846:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2387
[   19.932145] type=1505 audit(1245773071.878:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2391
[   23.444361] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   23.444364] vboxdrv: Successfully done.
[   23.444366] vboxdrv: Found 1 processor cores.
[   23.444418] VBoxDrv: dbg - g_abExecMemory=ffffffffa0b77aa0
[   23.444461] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   23.444463] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
[   23.651839] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0d16940
[   26.023209] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.023211] Bluetooth: BNEP filters: protocol multicast
[   26.062440] Bridge firewalling registered
[   31.055489] eth0: no link during initialization.
[   31.055946] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   31.056748] rt61pci 0000:01:06.0: firmware: requesting rt2561.bin
[   31.128476] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   46.185794] UDF-fs: No VRS found
[   46.236823] ISO 9660 Extensions: Microsoft Joliet Level 3
[   46.237689] ISOFS: changing to secondary root
[   50.065065] wlan0: authenticate with AP 00:01:38:ca:7a:53
[   50.066506] wlan0: authenticated
[   50.066509] wlan0: associate with AP 00:01:38:ca:7a:53
[   50.068819] wlan0: RX AssocResp from 00:01:38:ca:7a:53 (capab=0x431 status=0 aid=2)
[   50.068822] wlan0: associated
[   50.072485] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   60.644020] wlan0: no IPv6 routers present
[   92.056026] Clocksource tsc unstable (delta = -250003846 ns)



[Mr_X]

No está cargando el controlador de sonido. Prueba cargarlo manualmente y vuelve a sacar info con 'dmesg':

Código: [Seleccionar]

modprobe snd-intel8x0

dmesg | grep intel8x0


[Dabo]

kronnoxx, tu si te desanimasy mira mi hilo en este mismo subforo que hoy he puesto algo...

Haz lo que te dice Mr X por cierto y además de comprobar el resultado, como bien te ha apuntado, a ver que salida te devuelve dmesg 

[kronnoxx]

No está cargando el controlador de sonido. Prueba cargarlo manualmente y vuelve a sacar info con 'dmesg':

Código: [Seleccionar]

modprobe snd-intel8x0

dmesg | grep intel8x0


Mr X, nada cambia, sigo teniendo sonido por los altavoces convencionales pero nada por el 5.1. Esta es mi salida de "dmesg"

Código: [Seleccionar]

[    0.533006] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.533170] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.533336] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.533500] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.533677] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[    0.533848] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[    0.534018] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[    0.534188] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[    0.534297] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[    0.534476] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.534658] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[    0.534836] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.535014] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[    0.535191] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[    0.535369] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.535547] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.535724] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.535911] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.536104] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.536290] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[    0.536403] ACPI: WMI: Mapper loaded
[    0.536585] SCSI subsystem initialized
[    0.536618] libata version 3.00 loaded.
[    0.536663] usbcore: registered new interface driver usbfs
[    0.536677] usbcore: registered new interface driver hub
[    0.536702] usbcore: registered new device driver usb
[    0.536795] PCI: Using ACPI for IRQ routing
[    0.548008] Bluetooth: Core ver 2.13
[    0.548045] NET: Registered protocol family 31
[    0.548047] Bluetooth: HCI device and connection manager initialized
[    0.548049] Bluetooth: HCI socket layer initialized
[    0.548051] NET: Registered protocol family 8
[    0.548053] NET: Registered protocol family 20
[    0.548061] NetLabel: Initializing
[    0.548063] NetLabel:  domain hash size = 128
[    0.548064] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.548077] NetLabel:  unlabeled traffic allowed by default
[    0.548251] AppArmor: AppArmor Filesystem Enabled
[    0.560006] pnp: PnP ACPI init
[    0.560018] ACPI: bus type pnp registered
[    0.564409] pnp: PnP ACPI: found 13 devices
[    0.564411] ACPI: ACPI bus type pnp unregistered
[    0.564419] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.564421] system 00:01: ioport range 0x1080-0x10ff has been reserved
[    0.564423] system 00:01: ioport range 0x1400-0x147f has been reserved
[    0.564425] system 00:01: ioport range 0x1480-0x14ff has been reserved
[    0.564427] system 00:01: ioport range 0x1800-0x187f has been reserved
[    0.564430] system 00:01: ioport range 0x1880-0x18ff has been reserved
[    0.564434] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.564437] system 00:02: ioport range 0x800-0x87f has been reserved
[    0.564439] system 00:02: ioport range 0x295-0x314 has been reserved
[    0.564441] system 00:02: ioport range 0x294-0x297 could not be reserved
[    0.564447] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[    0.564452] system 00:0c: iomem range 0xd0000-0xd3fff has been reserved
[    0.564454] system 00:0c: iomem range 0xdcc00-0xdffff has been reserved
[    0.564459] system 00:0c: iomem range 0xf0000-0xfbfff could not be reserved
[    0.564462] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[    0.564464] system 00:0c: iomem range 0x3fff0000-0x3fffffff could not be reserved
[    0.564466] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[    0.564469] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.564471] system 00:0c: iomem range 0x100000-0x3ffeffff could not be reserved
[    0.564474] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[    0.564476] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.569141] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[    0.569143] pci 0000:00:09.0:   IO window: 0x9000-0x9fff
[    0.569146] pci 0000:00:09.0:   MEM window: 0xf4000000-0xf40fffff
[    0.569149] pci 0000:00:09.0:   PREFETCH window: disabled
[    0.569152] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[    0.569154] pci 0000:00:0b.0:   IO window: 0x6000-0x6fff
[    0.569156] pci 0000:00:0b.0:   MEM window: disabled
[    0.569158] pci 0000:00:0b.0:   PREFETCH window: disabled
[    0.569161] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[    0.569163] pci 0000:00:0c.0:   IO window: 0x8000-0x8fff
[    0.569166] pci 0000:00:0c.0:   MEM window: disabled
[    0.569168] pci 0000:00:0c.0:   PREFETCH window: disabled
[    0.569171] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
[    0.569173] pci 0000:00:0d.0:   IO window: 0x7000-0x7fff
[    0.569175] pci 0000:00:0d.0:   MEM window: disabled
[    0.569177] pci 0000:00:0d.0:   PREFETCH window: disabled
[    0.569182] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
[    0.569184] pci 0000:00:0e.0:   IO window: 0xa000-0xafff
[    0.569187] pci 0000:00:0e.0:   MEM window: 0xf0000000-0xf3ffffff
[    0.569190] pci 0000:00:0e.0:   PREFETCH window: 0x000000c0000000-0x000000dfffffff
[    0.569197] pci 0000:00:09.0: setting latency timer to 64
[    0.569202] pci 0000:00:0b.0: setting latency timer to 64
[    0.569206] pci 0000:00:0c.0: setting latency timer to 64
[    0.569210] pci 0000:00:0d.0: setting latency timer to 64
[    0.569214] pci 0000:00:0e.0: setting latency timer to 64
[    0.569217] bus: 00 index 0 io port: [0x00-0xffff]
[    0.569219] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[    0.569221] bus: 01 index 0 io port: [0x9000-0x9fff]
[    0.569222] bus: 01 index 1 mmio: [0xf4000000-0xf40fffff]
[    0.569224] bus: 01 index 2 mmio: [0x0-0x0]
[    0.569226] bus: 01 index 3 io port: [0x00-0xffff]
[    0.569228] bus: 01 index 4 mmio: [0x000000-0xffffffffffffffff]
[    0.569230] bus: 02 index 0 io port: [0x6000-0x6fff]
[    0.569231] bus: 02 index 1 mmio: [0x0-0x0]
[    0.569233] bus: 02 index 2 mmio: [0x0-0x0]
[    0.569234] bus: 02 index 3 mmio: [0x0-0x0]
[    0.569236] bus: 03 index 0 io port: [0x8000-0x8fff]
[    0.569237] bus: 03 index 1 mmio: [0x0-0x0]
[    0.569239] bus: 03 index 2 mmio: [0x0-0x0]
[    0.569240] bus: 03 index 3 mmio: [0x0-0x0]
[    0.569242] bus: 04 index 0 io port: [0x7000-0x7fff]
[    0.569243] bus: 04 index 1 mmio: [0x0-0x0]
[    0.569245] bus: 04 index 2 mmio: [0x0-0x0]
[    0.569246] bus: 04 index 3 mmio: [0x0-0x0]
[    0.569248] bus: 05 index 0 io port: [0xa000-0xafff]
[    0.569250] bus: 05 index 1 mmio: [0xf0000000-0xf3ffffff]
[    0.569251] bus: 05 index 2 mmio: [0xc0000000-0xdfffffff]
[    0.569253] bus: 05 index 3 mmio: [0x0-0x0]
[    0.569263] NET: Registered protocol family 2
[    0.572017] Switched to high resolution mode on CPU 0
[    0.604058] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.604369] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.605529] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.606112] TCP: Hash tables configured (established 131072 bind 65536)
[    0.606115] TCP reno registered
[    0.616093] NET: Registered protocol family 1
[    0.616224] checking if image is initramfs... it is
[    1.186290] Freeing initrd memory: 7772k freed
[    1.191087] audit: initializing netlink socket (disabled)
[    1.191101] type=2000 audit(1245788002.188:1): initialized
[    1.198802] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.199909] VFS: Disk quotas dquot_6.5.1
[    1.199956] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.200473] fuse init (API version 7.10)
[    1.200539] msgmni has been set to 1976
[    1.200686] alg: No test for stdrng (krng)
[    1.200696] io scheduler noop registered
[    1.200698] io scheduler anticipatory registered
[    1.200699] io scheduler deadline registered
[    1.200735] io scheduler cfq registered (default)
[    1.200753] pci 0000:00:00.0: Enabling HT MSI Mapping
[    1.216086] pci 0000:00:0b.0: Enabling HT MSI Mapping
[    1.216096] pci 0000:00:0b.0: Found enabled HT MSI Mapping
[    1.216099] pci 0000:00:0b.0: Linking AER extended capability
[    1.216107] pci 0000:00:0c.0: Enabling HT MSI Mapping
[    1.216113] pci 0000:00:0c.0: Found enabled HT MSI Mapping
[    1.216115] pci 0000:00:0c.0: Linking AER extended capability
[    1.216124] pci 0000:00:0d.0: Enabling HT MSI Mapping
[    1.216130] pci 0000:00:0d.0: Found enabled HT MSI Mapping
[    1.216132] pci 0000:00:0d.0: Linking AER extended capability
[    1.216140] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    1.216146] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[    1.216147] pci 0000:00:0e.0: Linking AER extended capability
[    1.216196] pci 0000:05:00.0: Boot video device
[    1.221335] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[    1.221354] pcieport-driver 0000:00:0b.0: found MSI capability
[    1.221367] pcieport-driver 0000:00:0b.0: irq 2303 for MSI/MSI-X
[    1.221372] pci_express 0000:00:0b.0:pcie00: allocate port service
[    1.221387] pci_express 0000:00:0b.0:pcie03: allocate port service
[    1.221417] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[    1.221434] pcieport-driver 0000:00:0c.0: found MSI capability
[    1.221444] pcieport-driver 0000:00:0c.0: irq 2302 for MSI/MSI-X
[    1.221449] pci_express 0000:00:0c.0:pcie00: allocate port service
[    1.221459] pci_express 0000:00:0c.0:pcie03: allocate port service
[    1.221488] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[    1.221506] pcieport-driver 0000:00:0d.0: found MSI capability
[    1.221515] pcieport-driver 0000:00:0d.0: irq 2301 for MSI/MSI-X
[    1.221520] pci_express 0000:00:0d.0:pcie00: allocate port service
[    1.221532] pci_express 0000:00:0d.0:pcie03: allocate port service
[    1.221562] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[    1.221579] pcieport-driver 0000:00:0e.0: found MSI capability
[    1.221588] pcieport-driver 0000:00:0e.0: irq 2300 for MSI/MSI-X
[    1.221593] pci_express 0000:00:0e.0:pcie00: allocate port service
[    1.221603] pci_express 0000:00:0e.0:pcie03: allocate port service
[    1.221641] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.221648] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.221760] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.221762] ACPI: Power Button (FF) [PWRF]
[    1.221799] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.221801] ACPI: Power Button (CM) [PWRB]
[    1.222297] processor ACPI_CPU:00: registered as cooling_device0
[    1.252142] Linux agpgart interface v0.103
[    1.252151] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.252230] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.252302] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.252504] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.253124] brd: module loaded
[    1.253395] loop: module loaded
[    1.253469] Fixed MDIO Bus: probed
[    1.253474] PPP generic driver version 2.4.2
[    1.253533] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.253559] Driver 'sd' needs updating - please use bus_type methods
[    1.253566] Driver 'sr' needs updating - please use bus_type methods
[    1.253728] sata_nv 0000:00:07.0: version 3.5
[    1.254129] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    1.254138] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    1.254193] sata_nv 0000:00:07.0: setting latency timer to 64
[    1.254284] scsi0 : sata_nv
[    1.254373] scsi1 : sata_nv
[    1.254505] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 23
[    1.254507] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 23
[    1.976021] ata1: SATA link down (SStatus 0 SControl 300)
[    2.856025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.903715] ata2.00: ATA-7: ST3200827AS, 3.AAH, max UDMA/133
[    2.903717] ata2.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.970361] ata2.00: configured for UDMA/133
[    2.970394] isa bounce pool size: 16 pages
[    2.970461] scsi 1:0:0:0: Direct-Access     ATA      ST3200827AS      3.AA PQ: 0 ANSI: 5
[    2.970547] sd 1:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[    2.970562] sd 1:0:0:0: [sda] Write Protect is off
[    2.970564] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.970586] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.970643] sd 1:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[    2.970656] sd 1:0:0:0: [sda] Write Protect is off
[    2.970658] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.970679] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.970682]  sda: sda1 sda2 < sda5 >
[    3.036351] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.036394] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    3.036783] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[    3.036791] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[    3.036832] sata_nv 0000:00:08.0: setting latency timer to 64
[    3.036892] scsi2 : sata_nv
[    3.036944] scsi3 : sata_nv
[    3.037080] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe000 irq 22
[    3.037082] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe008 irq 22
[    3.916026] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.924113] ata3.00: ATAPI: HL-DT-STDVD-RAM GSA-H30N, 1.01, max UDMA/100
[    3.940123] ata3.00: configured for UDMA/100
[    4.664020] ata4: SATA link down (SStatus 0 SControl 300)
[    4.665754] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H30N 1.01 PQ: 0 ANSI: 5
[    4.788041] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.788044] Uniform CD-ROM driver Revision: 3.20
[    4.788136] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    4.788175] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    4.788249] pata_amd 0000:00:06.0: version 0.3.10
[    4.788284] pata_amd 0000:00:06.0: setting latency timer to 64
[    4.788356] scsi4 : pata_amd
[    4.788408] scsi5 : pata_amd
[    4.789113] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    4.789115] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    5.152239] ata5.00: HPA unlocked: 234439535 -> 234441648, native 234441648
[    5.152243] ata5.00: ATA-6: ST3120022A, 3.54, max UDMA/100
[    5.152245] ata5.00: 234441648 sectors, multi 16: LBA48
[    5.152268] ata5.01: ATAPI: TOSHIBA DVD-ROM SD-M1612, 1004, max UDMA/33
[    5.152288] ata5: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c00000) ACPI=0x3f01f (20:60:0x1f)
[    5.152292] ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc6c00000) ACPI=0x701f (20:60:0x1f)
[    5.168345] ata5.00: configured for UDMA/100
[    5.200282] ata5.01: configured for UDMA/33
[    5.366883] scsi 4:0:0:0: Direct-Access     ATA      ST3120022A       3.54 PQ: 0 ANSI: 5
[    5.366959] sd 4:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[    5.366974] sd 4:0:0:0: [sdb] Write Protect is off
[    5.366976] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.366998] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.367053] sd 4:0:0:0: [sdb] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[    5.367065] sd 4:0:0:0: [sdb] Write Protect is off
[    5.367067] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.367088] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.367091]  sdb: sdb1 sdb2 < sdb5 sdb6 >
[    5.401604] sd 4:0:0:0: [sdb] Attached SCSI disk
[    5.401645] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    5.409688] scsi 4:0:1:0: CD-ROM            TOSHIBA  DVD-ROM SD-M1612 1004 PQ: 0 ANSI: 5
[    5.417994] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    5.418047] sr 4:0:1:0: Attached scsi CD-ROM sr1
[    5.418078] sr 4:0:1:0: Attached scsi generic sg3 type 5
[    5.418440] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.418761] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[    5.418770] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[    5.418786] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    5.418789] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    5.418850] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    5.418876] ehci_hcd 0000:00:02.1: debug port 1
[    5.418879] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    5.418895] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
[    5.428026] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    5.428090] usb usb1: configuration #1 chosen from 1 choice
[    5.428113] hub 1-0:1.0: USB hub found
[    5.428120] hub 1-0:1.0: 10 ports detected
[    5.428390] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[    5.428395] ehci_hcd 0000:01:08.2: PCI INT C -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[    5.428403] ehci_hcd 0000:01:08.2: EHCI Host Controller
[    5.428440] ehci_hcd 0000:01:08.2: new USB bus registered, assigned bus number 2
[    5.428479] ehci_hcd 0000:01:08.2: irq 18, io mem 0xf400c000
[    5.440021] ehci_hcd 0000:01:08.2: USB 2.0 started, EHCI 1.00
[    5.440066] usb usb2: configuration #1 chosen from 1 choice
[    5.440089] hub 2-0:1.0: USB hub found
[    5.440095] hub 2-0:1.0: 4 ports detected
[    5.440164] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.440446] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[    5.440451] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[    5.440460] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    5.440462] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    5.440500] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[    5.440517] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf4102000
[    5.498050] usb usb3: configuration #1 chosen from 1 choice
[    5.498070] hub 3-0:1.0: USB hub found
[    5.498078] hub 3-0:1.0: 10 ports detected
[    5.498160] uhci_hcd: USB Universal Host Controller Interface driver
[    5.498381] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[    5.498387] uhci_hcd 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[    5.498393] uhci_hcd 0000:01:08.0: UHCI Host Controller
[    5.498429] uhci_hcd 0000:01:08.0: new USB bus registered, assigned bus number 4
[    5.498453] uhci_hcd 0000:01:08.0: irq 16, io base 0x00009000
[    5.498521] usb usb4: configuration #1 chosen from 1 choice
[    5.498553] hub 4-0:1.0: USB hub found
[    5.498560] hub 4-0:1.0: 2 ports detected
[    5.498808] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[    5.498813] uhci_hcd 0000:01:08.1: PCI INT B -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[    5.498818] uhci_hcd 0000:01:08.1: UHCI Host Controller
[    5.498853] uhci_hcd 0000:01:08.1: new USB bus registered, assigned bus number 5
[    5.498877] uhci_hcd 0000:01:08.1: irq 17, io base 0x00009400
[    5.498943] usb usb5: configuration #1 chosen from 1 choice
[    5.498967] hub 5-0:1.0: USB hub found
[    5.498973] hub 5-0:1.0: 2 ports detected
[    5.499079] PNP: No PS/2 controller found. Probing ports directly.
[    5.501869] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.501874] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.512039] mice: PS/2 mouse device common for all mice
[    5.548065] rtc_cmos 00:04: RTC can wake from S4
[    5.548098] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    5.548118] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    5.548183] device-mapper: uevent: version 1.0.3
[    5.548280] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
[    5.548325] device-mapper: multipath: version 1.0.5 loaded
[    5.548327] device-mapper: multipath round-robin: version 1.0.0 loaded
[    5.548387] cpuidle: using governor ladder
[    5.548389] cpuidle: using governor menu
[    5.548779] TCP cubic registered
[    5.548840] NET: Registered protocol family 10
[    5.549178] lo: Disabled Privacy Extensions
[    5.549431] NET: Registered protocol family 17
[    5.549451] Bluetooth: L2CAP ver 2.11
[    5.549452] Bluetooth: L2CAP socket layer initialized
[    5.549455] Bluetooth: SCO (Voice Link) ver 0.6
[    5.549456] Bluetooth: SCO socket layer initialized
[    5.549480] Bluetooth: RFCOMM socket layer initialized
[    5.549486] Bluetooth: RFCOMM TTY layer initialized
[    5.549487] Bluetooth: RFCOMM ver 1.10
[    5.549504] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[    5.549541] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6
[    5.549543] powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12
[    5.549646] registered taskstats version 1
[    5.549801]   Magic number: 13:19:246
[    5.549837] pci_express 0000:00:0b.0:pcie00: hash matches
[    5.549884] rtc_cmos 00:04: setting system clock to 2009-06-23 20:13:27 UTC (1245788007)
[    5.549887] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    5.549889] EDD information not available.
[    5.549926] Freeing unused kernel memory: 532k freed
[    5.550176] Write protecting the kernel read-only data: 6684k
[    5.748037] usb 1-6: new high speed USB device using ehci_hcd and address 2
[    5.891600] usb 1-6: configuration #1 chosen from 1 choice
[    6.043096] Floppy drive(s): fd0 is 1.44M
[    6.063821] FDC 0 is a post-1991 82077
[    6.191851] Initializing USB Mass Storage driver...
[    6.193511] scsi6 : SCSI emulation for USB Mass Storage devices
[    6.194251] usbcore: registered new interface driver usb-storage
[    6.194255] USB Mass Storage support registered.
[    6.194491] usb-storage: device found at 2
[    6.194493] usb-storage: waiting for device to settle before scanning
[    6.235459] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[    6.235795] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[    6.235800] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[    6.235804] forcedeth 0000:00:0a.0: setting latency timer to 64
[    6.235868] nv_probe: set workaround bit for reversed mac addr
[    6.271045] ohci1394 0000:01:08.3: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[    6.323774] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[f400d000-f400d7ff]  Max Packet=[1024]  IR/IT contexts=[8/8]
[    6.344463] ohci1394 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[    6.394211] ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[f400e000-f400e7ff]  Max Packet=[4096]  IR/IT contexts=[4/8]
[    6.472034] usb 3-7: new full speed USB device using ohci_hcd and address 2
[    6.676570] usb 3-7: configuration #1 chosen from 1 choice
[    6.757073] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x3f1 @ 7, addr 00:14:85:8f:9e:27
[    6.757078] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
[    6.881440] PM: Starting manual resume from disk
[    6.881443] PM: Resume from partition 8:5
[    6.881445] PM: Checking hibernation image.
[    6.881596] PM: Resume from disk failed.
[    6.921937] kjournald starting.  Commit interval 5 seconds
[    6.921949] EXT3-fs: mounted filesystem with ordered data mode.
[    6.980029] usb 3-9: new low speed USB device using ohci_hcd and address 3
[    7.194110] usb 3-9: configuration #1 chosen from 1 choice
[    7.500027] usb 3-10: new low speed USB device using ohci_hcd and address 4
[    7.616110] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011060000000686]
[    7.720271] usb 3-10: configuration #1 chosen from 1 choice
[    7.744113] ieee1394: Host added: ID:BUS[1-00:1023]  GUID[00148556008f6a38]
[   11.192459] usb-storage: device scan complete
[   11.194184] scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
[   11.194927] scsi 6:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
[   11.195676] scsi 6:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
[   11.196301] scsi 6:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9317 PQ: 0 ANSI: 0
[   11.197244] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[   11.197294] sd 6:0:0:0: Attached scsi generic sg4 type 0
[   11.197968] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[   11.198003] sd 6:0:0:1: Attached scsi generic sg5 type 0
[   11.198721] sd 6:0:0:2: [sde] Attached SCSI removable disk
[   11.198753] sd 6:0:0:2: Attached scsi generic sg6 type 0
[   11.199468] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[   11.199501] sd 6:0:0:3: Attached scsi generic sg7 type 0
[   11.868461] udev: starting version 141
[   12.039408] parport_pc 00:0a: reported by Plug and Play ACPI
[   12.039448] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   12.041784] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[   12.041821] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[   12.093798] Linux video capture interface: v2.00
[   12.147908] usbcore: registered new interface driver hiddev
[   12.154444] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-9/3-9:1.0/input/input3
[   12.184169] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-9/input0
[   12.194780] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-9/3-9:1.1/input/input4
[   12.228363] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-9/input1
[   12.239548] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:02.0/usb3/3-10/3-10:1.0/input/input5
[   12.258270] gspca: main v2.3.0 registered
[   12.268201] generic-usb 0003:046D:C50E.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:02.0-10/input0
[   12.268223] usbcore: registered new interface driver usbhid
[   12.268243] usbhid: v2.6:USB HID core driver
[   12.270072] gspca: probing 046d:08ad
[   12.612128] cfg80211: Calling CRDA to update world regulatory domain
[   12.996715] cfg80211: World regulatory domain updated:
[   12.996718] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.996721] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.996723] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.996725] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.996727] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.996729] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.084362] nvidia: module license 'NVIDIA' taints kernel.
[   13.339989] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   13.345249] nvidia 0000:05:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[   13.345257] nvidia 0000:05:00.0: setting latency timer to 64
[   13.346534] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  180.44  Tue Mar 24 05:46:32 PST 2009
[   13.421240] usbcore: registered new interface driver lmpcm_usb
[   13.421263] lmpcm_usb: v0.5.5:USB Logitech MediaPlay Cordless Mouse driver
[   13.429596] ppdev: user-space parallel port driver
[   13.514143] saa7130/34: v4l2 driver version 0.2.14 loaded
[   13.514678] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[   13.514688] saa7134 0000:01:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[   13.514693] saa7133[0]: found at 0000:01:07.0, rev: 208, irq: 19, latency: 32, mmio: 0xf400f000
[   13.514698] saa7133[0]: subsystem: 11bd:002e, board: Pinnacle PCTV 40i/50i/110i (saa7133) [card=77,autodetected]
[   13.514785] saa7133[0]: board init: gpio is 200e000
[   13.664016] saa7133[0]: i2c eeprom 00: bd 11 2e 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   13.664024] saa7133[0]: i2c eeprom 10: ff e0 60 02 ff 20 ff ff ff ff ff ff ff ff ff ff
[   13.664030] saa7133[0]: i2c eeprom 20: 01 2c 01 02 02 01 04 30 98 ff 00 a0 ff 22 00 c2
[   13.664036] saa7133[0]: i2c eeprom 30: 96 ff 03 30 15 01 ff ff 0c 22 17 87 03 41 c2 8d
[   13.664042] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.664048] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.664053] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.664059] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.664065] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.664071] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.664076] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.664082] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.664088] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.664094] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.664100] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.664105] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   13.788158] tuner' 2-004b: chip found @ 0x96 (saa7133[0])
[   13.843504] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[   13.843509] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[   13.843644] Intel ICH 0000:00:04.0: setting latency timer to 64
[   13.872016] tda829x 2-004b: setting tuner address to 61
[   13.940018] tda829x 2-004b: type set to tda8290+75a
[   14.164017] intel8x0_measure_ac97_clock: measured 54719 usecs
[   14.164020] intel8x0: clocking to 46902
[   14.200037] zc3xx: probe 2wr ov vga 0x0000
[   14.271043] zc3xx: probe sensor -> 11
[   14.271045] zc3xx: Find Sensor HV7131R(c)
[   14.286156] gspca: probe ok
[   14.286170] gspca: probing 046d:08ad
[   14.286179] gspca: probing 046d:08ad
[   14.286201] usbcore: registered new interface driver zc3xx
[   14.286222] zc3xx: registered
[   14.396508] usbcore: registered new interface driver snd-usb-audio
[   17.796104] input: Pinnacle PCTV as /devices/virtual/input/input7
[   17.828069] ir-kbd-i2c: Pinnacle PCTV detected at i2c-2/2-0047/ir0 [saa7133[0]]
[   17.828269] saa7133[0]: registered device video1 [v4l2]
[   17.828317] saa7133[0]: registered device vbi0
[   17.828359] saa7133[0]: registered device radio0
[   17.894184] rt61pci 0000:01:06.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[   17.903988] saa7134 ALSA driver for DMA sound loaded
[   17.904053] saa7133[0]/alsa: saa7133[0] at 0xf400f000 irq 19 registered as card -2
[   17.906074] phy0: Selected rate control algorithm 'pid'
[   17.947761] Registered led device: rt61pci-phy0:radio
[   17.947797] Registered led device: rt61pci-phy0:assoc
[   18.038661] lp0: using parport0 (interrupt-driven).
[   18.127496] Adding 2963952k swap on /dev/sda5.  Priority:-1 extents:1 across:2963952k
[   18.668430] EXT3 FS on sda1, internal journal
[   19.719646] type=1505 audit(1245788021.666:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2371
[   19.765029] type=1505 audit(1245788021.714:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2375
[   19.765173] type=1505 audit(1245788021.714:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2375
[   19.765216] type=1505 audit(1245788021.714:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2375
[   19.765255] type=1505 audit(1245788021.714:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2375
[   19.892339] type=1505 audit(1245788021.842:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2380
[   19.892518] type=1505 audit(1245788021.842:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2380
[   19.922586] type=1505 audit(1245788021.870:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2384
[   24.814686] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   24.814689] vboxdrv: Successfully done.
[   24.814691] vboxdrv: Found 1 processor cores.
[   24.814741] VBoxDrv: dbg - g_abExecMemory=ffffffffa0b6faa0
[   24.814791] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   24.814793] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
[   25.022325] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0d0e940
[   27.430440] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   27.430443] Bluetooth: BNEP filters: protocol multicast
[   27.459077] Bridge firewalling registered
[   33.050017] eth0: no link during initialization.
[   33.050473] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   33.051219] rt61pci 0000:01:06.0: firmware: requesting rt2561.bin
[   33.148281] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   48.224294] UDF-fs: No VRS found
[   48.274423] ISO 9660 Extensions: Microsoft Joliet Level 3
[   48.275282] ISOFS: changing to secondary root
[   93.068022] Clocksource tsc unstable (delta = -157977890 ns)
[  177.672886] wlan0: authenticate with AP 00:01:38:ca:7a:53
[  177.872039] wlan0: authenticate with AP 00:01:38:ca:7a:53
[  177.873495] wlan0: authenticated
[  177.873500] wlan0: associate with AP 00:01:38:ca:7a:53
[  178.072025] wlan0: associate with AP 00:01:38:ca:7a:53
[  178.263066] wlan0: RX AssocResp from 00:01:38:ca:7a:53 (capab=0x431 status=0 aid=2)
[  178.263073] wlan0: associated
[  178.265368] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  188.860024] wlan0: no IPv6 routers present
kronnoxx@FIJO:~$




Y esto es lo que me pone al poner tus parámetros, es normal?:

kronnoxx@FIJO:~$ modprobe snd-intel8x0
WARNING: All config files need .conf: /etc/modprobe.d/oss-compat, it will be ignored in a future release.
kronnoxx@FIJO:~$ dmesg | grep intel8x0
[   14.164017] intel8x0_measure_ac97_clock: measured 54719 usecs
[   14.164020] intel8x0: clocking to 46902
kronnoxx@FIJO:~$
kronnoxx@FIJO:~$
Dabo, esto es muy complicado con la mentalidad windows de la que venimos, tal y como comentaba antes DIego. Por eso te desmoraliza mucho no tener ni idea por donde arreglar las cosas, pero con gente como vosotros da gusto. Me alegro de haberme sumado a este foro, espero aprender mucho de vosotros.

[Mr_X]

Apaga el equipo, desconecta la cámara, enciende la máquina y prueba el sonido...

Saca esta info (sin la cámara):

Código: [Seleccionar]

lsmod

lspci -v -nn

dmesg | grep intel8x0


[kronnoxx]

Apaga el equipo, desconecta la cámara, enciende la máquina y prueba el sonido...

Saca esta info (sin la cámara):

Código: [Seleccionar]

lsmod

lspci -v -nn

dmesg | grep intel8x0


Mr X, he hecho lo que me has dicho, y esta ha sido la salida:

Código: [Seleccionar]

kronnoxx@FIJO:~$ lsmod
Module                  Size  Used by
aes_x86_64             16384  1
aes_generic            36264  1 aes_x86_64
isofs                  43688  1
udf                    92584  0
binfmt_misc            18572  1
bridge                 63904  0
stp                    11140  1 bridge
bnep                   22912  2
vboxnetflt            110316  0
vboxdrv              1704748  1 vboxnetflt
video                  29204  0
output                 11648  1 video
input_polldev          12688  0
lp                     19588  0
arc4                   10240  2
ecb                    11392  2
saa7134_alsa           22176  0
ir_kbd_i2c             17552  0
tda827x                18948  1
tda8290                23428  1
tuner                  36036  0
snd_intel8x0           43816  4
snd_ac97_codec        133848  1 snd_intel8x0
ac97_bus               10368  1 snd_ac97_codec
rt61pci                32260  0
crc_itu_t              10496  2 udf,rt61pci
snd_pcm_oss            52352  0
snd_mixer_oss          24960  1 snd_pcm_oss
rt2x00pci              16768  1 rt61pci
snd_pcm                99336  5 saa7134_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
rt2x00lib              43008  2 rt61pci,rt2x00pci
saa7134               176732  1 saa7134_alsa
snd_seq_dummy          11524  0
led_class              13064  1 rt2x00lib
snd_seq_oss            41984  0
ir_common              56068  2 ir_kbd_i2c,saa7134
snd_seq_midi           15744  0
snd_rawmidi            33920  1 snd_seq_midi
compat_ioctl32         18304  1 saa7134
mac80211              251528  2 rt2x00pci,rt2x00lib
snd_seq_midi_event     16512  2 snd_seq_oss,snd_seq_midi
videodev               45184  3 tuner,saa7134,compat_ioctl32
psmouse                64028  0
snd_seq                66272  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              34064  2 snd_pcm,snd_seq
snd_seq_device         16276  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ppdev                  16904  0
v4l1_compat            23940  1 videodev
cfg80211               43552  2 rt2x00lib,mac80211
k8temp                 13440  0
serio_raw              14468  0
nvidia               8123768  36
pcspkr                 11136  0
v4l2_common            23296  2 tuner,saa7134
videobuf_dma_sg        22660  2 saa7134_alsa,saa7134
videobuf_core          29828  2 saa7134,videobuf_dma_sg
tveeprom               23428  1 saa7134
eeprom_93cx6           10624  1 rt61pci
snd                    78792  18 saa7134_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              16800  1 snd
snd_page_alloc         18704  2 snd_intel8x0,snd_pcm
parport_pc             45096  1
parport                49584  3 lp,ppdev,parport_pc
i2c_nforce2            16136  0
usbhid                 47040  0
ohci1394               42036  0
ieee1394              108288  1 ohci1394
forcedeth              68368  0
floppy                 75816  0
usb_storage           115392  0
fbcon                  49792  0
tileblit               11264  1 fbcon
font                   17024  1 fbcon
bitblit                14464  1 fbcon
softcursor             10368  1 bitblit
kronnoxx@FIJO:~$
kronnoxx@FIJO:~$ lspci -v -nn
00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller [10de:005e] (rev a3)
Subsystem: Giga-byte Technology Device [1458:5000]
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: <access denied>

00:01.0 ISA bridge [0601]: nVidia Corporation CK804 ISA Bridge [10de:0050] (rev a3)
Subsystem: Giga-byte Technology Device [1458:0c11]
Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 SMBus [0c05]: nVidia Corporation CK804 SMBus [10de:0052] (rev a2)
Subsystem: Giga-byte Technology Device [1458:0c11]
Flags: 66MHz, fast devsel, IRQ 10
I/O ports at e400 [size=32]
I/O ports at 1c00 [size=64]
I/O ports at 1c40 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:02.0 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10)
Subsystem: Giga-byte Technology Device [1458:5004]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at f4102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd

00:02.1 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005b] (rev a3) (prog-if 20)
Subsystem: Giga-byte Technology Device [1458:5004]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at feb00000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:04.0 Multimedia audio controller [0401]: nVidia Corporation CK804 AC'97 Audio Controller [10de:0059] (rev a2)
Subsystem: Giga-byte Technology Device [1458:ae01]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
I/O ports at b400 [size=256]
I/O ports at b800 [size=256]
Memory at f4105000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0

00:06.0 IDE interface [0101]: nVidia Corporation CK804 IDE [10de:0053] (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Device [f458:5002]
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at f000 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd

00:07.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0054] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b003]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at cc00 [size=16]
Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv

00:08.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0055] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b003]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
I/O ports at 09e0 [size=8]
I/O ports at 0be0 [size=4]
I/O ports at 0960 [size=8]
I/O ports at 0b60 [size=4]
I/O ports at e000 [size=16]
Memory at f4101000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv

00:09.0 PCI bridge [0604]: nVidia Corporation CK804 PCI Bridge [10de:005c] (rev a2) (prog-if 01)
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f4000000-f40fffff

00:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057] (rev a3)
Subsystem: Giga-byte Technology Device [1458:e000]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at f4103000 (32-bit, non-prefetchable) [size=4K]
I/O ports at e800 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth

00:0b.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00006000-00006fff
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:0c.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00008000-00008fff
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:0d.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00007000-00007fff
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f0000000-f3ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Flags: fast devsel
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Flags: fast devsel

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Flags: fast devsel

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Flags: fast devsel
Kernel driver in use: k8temp
Kernel modules: k8temp

01:06.0 Network controller [0280]: RaLink RT2561/RT61 rev B 802.11g [1814:0302]
Subsystem: Device [1948:3c24]
Flags: bus master, slow devsel, latency 32, IRQ 18
Memory at f4000000 (32-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: rt61pci
Kernel modules: rt61pci

01:07.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d0)
Subsystem: Pinnacle Systems Inc. Device [11bd:002e]
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at f400f000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: saa7134
Kernel modules: saa7134

01:08.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at 9000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

01:08.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Flags: bus master, medium devsel, latency 32, IRQ 17
I/O ports at 9400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

01:08.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 62) (prog-if 20)
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at f400c000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

01:08.3 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev 46) (prog-if 10)
Subsystem: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044]
Flags: bus master, medium devsel, latency 32, IRQ 16
Memory at f400d000 (32-bit, non-prefetchable) [size=2K]
I/O ports at 9800 [size=128]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394

01:0a.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller [104c:8025] (rev 01) (prog-if 10)
Subsystem: Giga-byte Technology Device [1458:1000]
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at f400e000 (32-bit, non-prefetchable) [size=2K]
Memory at f4008000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394

05:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8600GT [10de:0401] (rev a1)
Subsystem: XFX Pine Group Inc. Device [1682:2286]
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at f2000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=512M]
Memory at f0000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at a000 [size=128]
[virtual] Expansion ROM at f3000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb

kronnoxx@FIJO:~$ dmesg | grep intel8x0
[   14.168016] intel8x0_measure_ac97_clock: measured 54726 usecs
[   14.168019] intel8x0: clocking to 46908
kronnoxx@FIJO:~$


Estoy revisando controles de sonido y están todas las barras altas, incluso he probado usando el alsa mixer... y nada  

[Mr_X]

¿Qué te dice el comando:

Código: [Seleccionar]

asoundconf list

?

[kallikantzaroi]

güenas


lo disho, yo de ti instalaba el entorno KDE aver si kon el pasa lo mismo ke kon Gnome.



saluetes 

[kronnoxx]

¿Qué te dice el comando:

Código: [Seleccionar]

asoundconf list

?

Me dice esto:

Código: [Seleccionar]

kronnoxx@FIJO:~$ asoundconf list
Names of available sound cards:
CK804
SAA7134
kronnoxx@FIJO:~$


Mr X, eso es para ver las tarjetas gráficas que me reconoce no? creo que me reconoce bien la ck804 que es la interna de la placa.

Kalli, cuando me empolle bien como hacer el cambio a KDE (NO TENGO NI FLORES) y cuando disponga de un poco de tiempo doy el salto y os comento los resultados.