Muy buenas, soy nueva y necesito ayuda con mi grabadora de dvd. No sé qué pasa que daña los dvd virgenes que utilizo (marcas verbatim, HP), querria actualizar el firmware, pero he leido por ahi que hay que abrir la torre y mover cosas que nunca he visto, jumper, cables ide...
No hay forma de saber que todo eso está bien configurado, es decir, comprobar con la bios, panel de control, algún programa tipo everest que está todo bien puesto, y bajarme la actualización de la web del fabricante? Es que si no es así, me veo incapaz de actualizar.
Las instrucciones que vienen en la página de lg, que es la marca, son estas (pero tampoco sé inglés, así que no me entero de nada):
Saludines
¡Ø Critical Instructions: (to be followed carefully)
1. Connect the drive as ¡°master¡± by it self, on the secondary IDE controller
with no other device on the same IDE cable, making note to set the jumper
on the back of the drive to the ¡°master¡± position.
2. Download the file GSA-4120A115(EW).ZIP to a folder of your choice.
This download includes this ¡°Read me(ew)¡± text file, as well as
the GSA4120A115.EXE program, which will auto-update your drive¡¯s firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC,
during the update process, thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray before
you start the update procedure.
5. Go into the folder with the update file and double click the GSA4120A115.EXE program
and click the ¡°UPDATE¡± button (red). Once the update is complete,
you will see ¡°Firmware Update Complete¡± and the button will become green
and advise you to reboot the system.
You will need to reboot your PC.
The update will be complete, after you reboot your system.
WARNING: Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.