Tema: Creo que me cascó la grabadora de DVDs (SOLUCIONADO)

[fedelf]

Lo primero de todo perdon por el peñazo de post, pero es que no quiero que me falte nada por explicar.

Bueno, os explico, los ultimos 5 DVD que he grabado me los ha tirado la grabadora por distintos motivos, a ver si os puedo hacer un cronograma

Todos los DVD grabados con el mismo tipo de DVD, marca Think Xtra, he grabado ya muchos antes con estos mismos y hasta ahora no habia tenido fallos, todos estos DVD son de datos, grabados desde el disco duro, con Windows XP Pro.

Primer y segundo DVD grabados con nero 6.6.0.6 mismo error en ambos, el log:

IA32
WinAspi: -
ahead WinASPI: File 'C:\Archivos de programa\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:21:30
Nero Version: 6.6.0.6
Recorder:             <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 0 - 6.6.0.6
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI
CD-ROM:               <HL-DT-ST DVDRAM GSA-4082B>Version: A201 - HA 1 TA 0 - 6.6.0.6
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : ST3120022A                       atapi Port 0 ID 0  DMA: On
DiskPeripheral       : IC35L060AVER07-0                 atapi Port 0 ID 1  DMA: On
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4082B        atapi Port 1 ID 0  DMA: On
CdRomPeripheral      : AOPEN CD-RW CRW5224              atapi Port 1 ID 1  DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082   F:   CDRom0
AOPEN CD-RW CRW5224        G:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 511MB (523764kB)
Free physical memory: 122MB (125524kB)
Memory in use       : 76 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.10.2005
ISO compilation
7:57:38   #1 Text 0 File Isodoc.cpp, Line 6168
   Iso document burn settings
   ------------------------------------------
   Determine maximum speed : FALSE
   Simulate                : FALSE
   Write                   : TRUE
   Finalize CD             : TRUE
   Multisession            : FALSE
   Burning mode            : DAO
   Mode                    : 1
   ISO Level               : 2 (Max. of 31 chars)
   Character set           : ISO 9660
   Joliet                  : TRUE
   Allow pathdepth more than 8 directories : TRUE
   Allow more than 255 characters in path  : TRUE
   Write ISO9660 ;1 file extensions        : TRUE
   
7:57:38   #2 Text 0 File Reader.cpp, Line 127
   Reader running
   
7:57:38   #3 Text 0 File Writer.cpp, Line 122
   Writer HL-DT-ST DVDRAM GSA-4082B running
   
7:57:38   #4 ISO9660GEN -11 File geniso.cpp, Line 3286
   First writeable address = 0 (0x00000000)
   
7:57:38   #5 Text 0 File Burncd.cpp, Line 3155
   Turn on Disc-at-once, using DVD media
   
7:57:38   #6 Text 0 File DlgWaitCD.cpp, Line 257
   Last possible write address on media:  2298495 (510:46.45, 4489MB)
   Last address to be written:            2035567 (452:20.67, 3975MB)
   
7:57:38   #7 Text 0 File DlgWaitCD.cpp, Line 269
   Write in overburning mode: NO (enabled: CD DVD)
   
7:57:38   #8 Text 0 File DlgWaitCD.cpp, Line 2311
   Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD-R
    Disc Manufacturer: VANGUA - RD
    Disc Application Code: 64, Disc Physical Code: 193
   
7:57:38   #9 Text 0 File DlgWaitCD.cpp, Line 431
   >>> Protocol of DlgWaitCD activities: <<<
   =========================================
   
7:57:38   #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
   Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
       2 indices, index0 (150) not provided
       original disc pos #0 + 2035568 (2035568) = #2035568/452:20.68
       relocatable, disc pos for caching/writing not required/ required, no patch infos
       -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2035568 blocks [HL-DT-ST DVDRAM GSA-4082B]
   --------------------------------------------------------------
   
7:57:38   #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
   Prepare recorder [HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO
   DAO infos:
   ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
      1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4168843264, ISRC ""
   DAO layout:
   ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
          0 |  lead-in |   0 |    0x41 | 0x00
          0 |        1 |   0 |    0x41 | 0x00
          0 |        1 |   1 |    0x41 | 0x00
    2035568 | lead-out |   1 |    0x41 | 0x00
   
7:57:38   #12 Phase 24 File dlgbrnst.cpp, Line 1832
   Caching of files started
   
7:57:38   #13 Text 0 File Burncd.cpp, Line 4042
   Cache writing successful.
   
7:57:38   #14 Phase 25 File dlgbrnst.cpp, Line 1832
   Caching of files completed
   
7:57:38   #15 Phase 36 File dlgbrnst.cpp, Line 1832
   Burn process started at 2x (2.770 KB/s)
   
7:57:38   #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
   Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
   
7:57:38   #17 Text 0 File DVDR.cpp, Line 2300
   Recording mode: Sequential Recording Mode
   
7:57:38   #18 Text 0 File Mmc.cpp, Line 21079
   Set BUFE: Buffer underrun protection -> ON
   
7:57:38   #19 Text 0 File DVDR.cpp, Line 2441
   Start write address at LBA 0
   DVD high compatibility mode: Yes
   
7:57:38   #20 Text 0 File Cdrdrv.cpp, Line 8332
   ---- DVD Structure: Physical Format Information (00h) ----
   Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R   (2), Part Version: 5
    Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
    Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
    Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area:      26127F h
    End Sector Number in Layer 0:                 0 h
    Data in Burst Cutting Area (BCA) does not exist
     Start sector number of the current Border-Out: 2FE10 h
     Start sector number of the next Border-In:     2FFA0 h
    Media Specific [16..63]:
         00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
         00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00    ................
         00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
   
7:57:45   #21 Text 0 File Cdrdrv.cpp, Line 1284
   07:57:45.640 - HL-DT-ST DVDRAM GSA-4082B\H1 T0 : Queue again later
   
8:23:14   #22 SCSI -1061 File Cdrdrv.cpp, Line 1432
   SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03CE0000
   Status:     0x04 (0x01, SCSI_ERR)
   HA-Status   0x00 (0x00, OK)
   TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
   Sense Key:  0x04 (KEY_HARDWARE_ERROR)
   Sense Code: 0x44
   Sense Qual: 0x86
   CDB Data:   0x2A 0x00 0x00 0x1E 0xBF 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
   Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
               0x32 0x24 0x04 0x0C 0x44 0x86
   
8:23:14   #23 CDR -1061 File Writer.cpp, Line 311
   Internal target failure
   
8:23:15   #24 Text 0 File ThreadedTransfer.cpp, Line 228
   all writers idle, stopping conversion
   
8:23:15   #25 Text 0 File DVDR.cpp, Line 2682
   EndDAO: Last written address was 2015135
   
8:23:15   #26 CDR -1061 File WriterStatus.cpp, Line 167
   Internal target failure
   
8:23:15   #27 TRANSFER -24 File WriterStatus.cpp, Line 167
   Could not perform end of Disc-at-once
   
8:23:15   #28 Phase 38 File dlgbrnst.cpp, Line 1832
   Burn process failed at 2x (2.770 KB/s)
   

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20/12/2004 20:37:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 7:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[fedelf]

Tercer DVD actualice el firmware de la grabadora, tenia instalado el A201 y actualice a la ultima oficial, la A208 por si acaso, se supone que ahora puedo grabar tambien a doble capa, pero claro, cascao vaser que no

Ragnarok Kam
Armagedon S.A.
1A23-0009-8030-2368-9125-4276

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Archivos de programa\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:21:30
Nero Version: 6.6.0.6
Recorder:             <HL-DT-ST DVDRAM GSA-4082B>Version: A208 - HA 1 TA 0 - 6.6.0.6
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI
CD-ROM:               <HL-DT-ST DVDRAM GSA-4082B>Version: A208 - HA 1 TA 0 - 6.6.0.6
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : ST3120022A                       atapi Port 0 ID 0  DMA: On
DiskPeripheral       : IC35L060AVER07-0                 atapi Port 0 ID 1  DMA: On
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4082B        atapi Port 1 ID 0  DMA: On
CdRomPeripheral      : AOPEN CD-RW CRW5224              atapi Port 1 ID 1  DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082   F:   CDRom3
AOPEN CD-RW CRW5224        G:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 511MB (523764kB)
Free physical memory: 104MB (107248kB)
Memory in use       : 79 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.10.2005
ISO compilation
12:49:11   #1 Text 0 File Isodoc.cpp, Line 6168
   Iso document burn settings
   ------------------------------------------
   Determine maximum speed : FALSE
   Simulate                : FALSE
   Write                   : TRUE
   Finalize CD             : TRUE
   Multisession            : FALSE
   Burning mode            : DAO
   Mode                    : 1
   ISO Level               : 2 (Max. of 31 chars)
   Character set           : ISO 9660
   Joliet                  : TRUE
   Allow pathdepth more than 8 directories : TRUE
   Allow more than 255 characters in path  : TRUE
   Write ISO9660 ;1 file extensions        : TRUE
   
12:49:11   #2 Text 0 File Reader.cpp, Line 127
   Reader running
   
12:49:11   #3 Text 0 File Writer.cpp, Line 122
   Writer HL-DT-ST DVDRAM GSA-4082B running
   
12:49:11   #4 ISO9660GEN -11 File geniso.cpp, Line 3286
   First writeable address = 0 (0x00000000)
   
12:49:11   #5 Text 0 File Burncd.cpp, Line 3155
   Turn on Disc-at-once, using DVD media
   
12:49:11   #6 Text 0 File DlgWaitCD.cpp, Line 257
   Last possible write address on media:  2298495 (510:46.45, 4489MB)
   Last address to be written:            2035567 (452:20.67, 3975MB)
   
12:49:11   #7 Text 0 File DlgWaitCD.cpp, Line 269
   Write in overburning mode: NO (enabled: CD DVD)
   
12:49:11   #8 Text 0 File DlgWaitCD.cpp, Line 2311
   Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD-R
    Disc Manufacturer: VANGUA - RD
    Disc Application Code: 64, Disc Physical Code: 193
   
12:49:11   #9 Text 0 File DlgWaitCD.cpp, Line 431
   >>> Protocol of DlgWaitCD activities: <<<
   =========================================
   
12:49:11   #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
   Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
       2 indices, index0 (150) not provided
       original disc pos #0 + 2035568 (2035568) = #2035568/452:20.68
       relocatable, disc pos for caching/writing not required/ required, no patch infos
       -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2035568 blocks [HL-DT-ST DVDRAM GSA-4082B]
   --------------------------------------------------------------
   
12:49:11   #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
   Prepare recorder [HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO
   DAO infos:
   ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
      1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4168843264, ISRC ""
   DAO layout:
   ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
          0 |  lead-in |   0 |    0x41 | 0x00
          0 |        1 |   0 |    0x41 | 0x00
          0 |        1 |   1 |    0x41 | 0x00
    2035568 | lead-out |   1 |    0x41 | 0x00
   
12:49:11   #12 Phase 24 File dlgbrnst.cpp, Line 1832
   Caching of files started
   
12:49:11   #13 Text 0 File Burncd.cpp, Line 4042
   Cache writing successful.
   
12:49:11   #14 Phase 25 File dlgbrnst.cpp, Line 1832
   Caching of files completed
   
12:49:11   #15 Phase 36 File dlgbrnst.cpp, Line 1832
   Burn process started at 2x (2.770 KB/s)
   
12:49:11   #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
   Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
   
12:49:11   #17 Text 0 File DVDR.cpp, Line 2300
   Recording mode: Sequential Recording Mode
   
12:49:11   #18 Text 0 File Mmc.cpp, Line 21079
   Set BUFE: Buffer underrun protection -> ON
   
12:49:11   #19 Text 0 File DVDR.cpp, Line 2441
   Start write address at LBA 0
   DVD high compatibility mode: Yes
   
12:49:11   #20 Text 0 File Cdrdrv.cpp, Line 8332
   ---- DVD Structure: Physical Format Information (00h) ----
   Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R   (2), Part Version: 5
    Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
    Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
    Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area:      26127F h
    End Sector Number in Layer 0:                 0 h
    Data in Burst Cutting Area (BCA) does not exist
     Start sector number of the current Border-Out: 2FE10 h
     Start sector number of the next Border-In:     2FFA0 h
    Media Specific [16..63]:
         00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
         00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00    ................
         00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
   
12:49:19   #21 Text 0 File Cdrdrv.cpp, Line 1284
   12:49:19.890 - HL-DT-ST DVDRAM GSA-4082B\H1 T0 : Queue again later
   
13:15:02   #22 Text 0 File WriterStatus.cpp, Line 116
   <HL-DT-ST DVDRAM GSA-4082B> start writing Lead-Out at LBA 2035568 (1F0F70h), lenght 0 blocks
   
13:15:02   #23 Text 0 File ThreadedTransfer.cpp, Line 228
   all writers idle, stopping conversion
   
13:15:02   #24 Text 0 File DVDR.cpp, Line 2682
   EndDAO: Last written address was 2035567
   
13:15:54   #25 Phase 37 File dlgbrnst.cpp, Line 1832
   Burn process completed successfully at 2x (2.770 KB/s)
   
13:15:54   #26 Phase 78 File dlgbrnst.cpp, Line 1832
   Data verification started
   
y el mismo error hasta #999

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20/12/2004 20:37:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 7:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[fedelf]

y por fin el ultimo, 4º DVD, actualice nero a la version 6.6.0.16, la ultima se supone, y lo siguiente, vamos, el mismo perro con el mismo collar :

IA32
WinAspi: -
ahead WinASPI: File 'C:\Archivos de programa\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b

Recorder:             <HL-DT-ST DVDRAM GSA-4082B>Version: A208 - HA 1 TA 0 - 6.6.0.16
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI
CD-ROM:               <HL-DT-ST DVDRAM GSA-4082B>Version: A208 - HA 1 TA 0 - 6.6.0.16
 Adapter driver:      <atapi>                   HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : ST3120022A                       atapi Port 0 ID 0  DMA: On
DiskPeripheral       : IC35L060AVER07-0                 atapi Port 0 ID 1  DMA: On
CdRomPeripheral      : HL-DT-ST DVDRAM GSA-4082B        atapi Port 1 ID 0  DMA: On
CdRomPeripheral      : AOPEN CD-RW CRW5224              atapi Port 1 ID 1  DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082B  F:   CDRom3
AOPEN CD-RW CRW5224        G:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 511MB (523764kB)
Free physical memory: 166MB (170908kB)
Memory in use       : 67 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.10.2005
ISO compilation
18:13:16   #1 Text 0 File Isodoc.cpp, Line 6356
   Iso document burn settings
   ------------------------------------------
   Determine maximum speed : FALSE
   Simulate                : FALSE
   Write                   : TRUE
   Finalize CD             : TRUE
   Multisession            : FALSE
   Burning mode            : DAO
   Mode                    : 1
   ISO Level               : 2 (Max. of 31 chars)
   Character set           : ISO 9660
   Joliet                  : TRUE
   Allow pathdepth more than 8 directories : TRUE
   Allow more than 255 characters in path  : TRUE
   Write ISO9660 ;1 file extensions        : TRUE
   
18:13:16   #2 Text 0 File Reader.cpp, Line 127
   Reader running
   
18:13:16   #3 Text 0 File Writer.cpp, Line 122
   Writer HL-DT-ST DVDRAM GSA-4082B running
   
18:13:16   #4 ISO9660GEN -11 File geniso.cpp, Line 3309
   First writeable address = 0 (0x00000000)
   
18:13:16   #5 Text 0 File Burncd.cpp, Line 3233
   Turn on Disc-At-Once, using DVD media
   
18:13:16   #6 Text 0 File DlgWaitCD.cpp, Line 270
   Last possible write address on media:  2298495 (510:46.45, 4489MB)
   Last address to be written:            2035567 (452:20.67, 3975MB)
   
18:13:16   #7 Text 0 File DlgWaitCD.cpp, Line 282
   Write in overburning mode: NO (enabled: CD DVD)
   
18:13:17   #8 Text 0 File DlgWaitCD.cpp, Line 2483
   Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD-R
    Disc Manufacturer: VANGUA - RD
    Disc Application Code: 64, Disc Physical Code: 193
   
18:13:17   #9 Text 0 File DlgWaitCD.cpp, Line 448
   >>> Protocol of DlgWaitCD activities: <<<
   =========================================
   
18:13:17   #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
   Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
       2 indices, index0 (150) not provided
       original disc pos #0 + 2035568 (2035568) = #2035568/452:20.68
       relocatable, disc pos for caching/writing not required/ required, no patch infos
       -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2035568 blocks [HL-DT-ST DVDRAM GSA-4082B]
   --------------------------------------------------------------
   
18:13:17   #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
   Prepare recorder [HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO
   DAO infos:
   ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
      1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4168843264, ISRC ""
   DAO layout:
   ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
          0 |  lead-in |   0 |    0x41 | 0x00
          0 |        1 |   0 |    0x41 | 0x00
          0 |        1 |   1 |    0x41 | 0x00
    2035568 | lead-out |   1 |    0x41 | 0x00
   
18:13:17   #12 Phase 24 File dlgbrnst.cpp, Line 1832
   Caching of files started
   
18:13:17   #13 Text 0 File Burncd.cpp, Line 4120
   Cache writing successful.
   
18:13:17   #14 Phase 25 File dlgbrnst.cpp, Line 1832
   Caching of files completed
   
18:13:17   #15 Phase 36 File dlgbrnst.cpp, Line 1832
   Burn process started at 2x (2.770 KB/s)
   
18:13:17   #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
   Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
   
18:13:17   #17 Text 0 File DVDR.cpp, Line 2379
   Recording mode: Sequential Recording Mode
   
18:13:17   #18 Text 0 File Mmc.cpp, Line 21708
   Set BUFE: Buffer underrun protection -> ON
   
18:13:17   #19 Text 0 File DVDR.cpp, Line 2534
   Start write address at LBA 0
   DVD high compatibility mode: Yes
   
18:13:17   #20 Text 0 File Cdrdrv.cpp, Line 8862
   ---- DVD Structure: Physical Format Information (00h) ----
   Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
    Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
    Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area:      26127F h
    End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
     Start sector number of the current Border-Out: 2FE10 h
     Start sector number of the next Border-In:     2FFA0 h
    Media Specific [16..63]:
         00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
         00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00    ................
         00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
   
18:13:26   #21 Text 0 File Cdrdrv.cpp, Line 1286
   18:13:26.187 - HL-DT-ST DVDRAM GSA-4082B\H1 T0 : Queue again later
   
18:37:50   #22 SCSI -1061 File Cdrdrv.cpp, Line 1434
   SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04150000
   Status:     0x04 (0x01, SCSI_ERR)
   HA-Status   0x00 (0x00, OK)
   TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
   Sense Key:  0x04 (KEY_HARDWARE_ERROR)
   Sense Code: 0x44
   Sense Qual: 0x86
   CDB Data:   0x2A 0x00 0x00 0x1D 0x69 0x80 0x00 0x00 0x20 0x00 0x00 0x00
   Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
               0x32 0x24 0x04 0x0C 0x44 0x86
   
18:37:50   #23 CDR -1061 File Writer.cpp, Line 311
   Internal target failure
   
18:37:50   #24 Text 0 File ThreadedTransfer.cpp, Line 228
   all writers idle, stopping conversion
   
18:37:50   #25 Text 0 File ThreadedTransfer.cpp, Line 222
   conversion idle, stopping reader
   
18:37:51   #26 Text 0 File DVDR.cpp, Line 2774
   EndDAO: Last written address was 1927551
   
18:37:51   #27 CDR -1061 File WriterStatus.cpp, Line 167
   Internal target failure
   
18:37:51   #28 TRANSFER -24 File WriterStatus.cpp, Line 167
   Could not perform end of Disc-at-once
   
18:37:51   #29 Phase 38 File dlgbrnst.cpp, Line 1832
   Burn process failed at 2x (2.770 KB/s)
   

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20/12/2004 20:37:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 7:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Ahora ya podeis cagaros en mis muelas.

[Liamngls]

Pues yo probaría con alguna otra marca , si acaso RW para no perder los discos ...... el que una marca haya funcionado durante X tiempo no tiene nada que ver , a veces las grabadoras se vuelven caprichosas de repente....incluso probaría con otro soft de grabación por si fuese cosa del Nero , si son grabaciones de datos puedes usar el DeepBurner en su versión Free , que va de lujo

[Tiburciano polainas]

En los logs no veo nada raro...  :?
Limpia la lente, prueba con ora marca de CD y en última instancia, cambia las ASPI, aqui tienes otra  :wink:

[fedelf]

Os cuento lo que hice esta mañana:

Primero elimine la unidad del administrador de dispositivos como me recomento dest para que al reiniciar se volviera a instalar, me baje los ultimos ASPI de Adaptec y los instale descargué el DeepBurner y lo instalé, grabe un DVD de datos, con otros videos y el ultimo DVD que me quedaba de los que comenté, resultado:

Grabado supuestamente de forma correcta, sin errores, pero al intentar acceder se abre una ventanita con el error:

Funcion Incorrecta.

Solo me queda comprar el jueves mas y probar los nuevos, pero no se porque me da que se va a haber muerto como grabadora, como lectora aun funciona.

[fedelf]

Estooooo, bueno, como os lo diria. :beaten: que esta mañana he comprado unos verbatin, acabo de probar, y he grabado sin ningun error

Chas gracias.  :lol:

[destroyer]

 

 :superman:

[Liamngls]

En fín...... te tiraría de las orejas , pero las herramientas de diálogo las tienes tú

Unas birritas para celebrarlo vendrían bien

[fedelf]

En fín...... te tiraría de las orejas , pero las herramientas de diálogo las tienes tú

Unas birritas para celebrarlo vendrían bien

Eso esta echo.  :badsmile: Incluso a lo mejor despues de un par hasta te dejo que me tires de las orejas.