Autor Tema: Para los conocedores de Samba  (Leído 12394 veces)

Desconectado cherry

  • Junior Member
  • **
  • Mensajes: 15
Para los conocedores de Samba
« en: 09 de Julio de 2005, 05:41:13 pm »
Cita de: Mr_X
Pues justamente el artículo es de RedHat...

Saludos


Gracias:
Lei el articulo y realize todo de acuerdo a lo leido, sin embargo no me funciona, seguramente tengo algo diferente en mis compudadores, inicie MYGROUP  tal como lo indican y nada.
Seguire intentando

Desconectado Mr_X

  • Iniciado
  • *****
  • Mensajes: 2635
Para los conocedores de Samba
« Respuesta #1 en: 09 de Julio de 2005, 07:46:52 pm »
¿Cuál es el grupo de trabajo en Windows? ¿te manda algún error? ¿(re)iniciaste Samba en Linux? ¿el usuario de Linux está dado de alta en Windows con la misma contraseña? ¿creaste las contraseñas Samba? ¿probaste conectarte desde la línea de comandos? ¿qué entorno gráfico usas en Linux (KDE, Gnome, Xfce...)?
Pega aquí el contenido de tu archivo /etc/samba/smb.conf
"... I'll wait I sow the seed, I set the scene and I watch the world go by..."

Desconectado cherry

  • Junior Member
  • **
  • Mensajes: 15
Para los conocedores de Samba
« Respuesta #2 en: 10 de Julio de 2005, 01:27:16 pm »
Cita de: Mr_X
¿Cuál es el grupo de trabajo en Windows? ¿te manda algún error? ¿(re)iniciaste Samba en Linux? ¿el usuario de Linux está dado de alta en Windows con la misma contraseña? ¿creaste las contraseñas Samba? ¿probaste conectarte desde la línea de comandos? ¿qué entorno gráfico usas en Linux (KDE, Gnome, Xfce...)?
Pega aquí el contenido de tu archivo /etc/samba/smb.conf


Usu entorno (KDE) s un poco largo pero alii te Va Gracias

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name
        workgroup = MYGROUP

# server string is the equivalent of the NT Description field
        server string = Samba Server

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;   hosts allow = 192.168.1. 192.168.2. 127.

# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
        printcap name = /etc/printcap
        load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
;   printing = cups

# This option tells cups that the data has already been rasterized
        cups options = raw

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
        log file = /var/log/samba/%m.log
# all log information in one file
#   log file = /var/log/samba/smbd.log

# Put a capping on the size of the log files (in Kb).
        max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.
# Use password server option only with security = server
;   password server = <NT-Server-Name>

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
;  password level = 8
;  username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
;  encrypt passwords = yes
;  smb passwd file = /etc/samba/smbpasswd

# The following are needed to allow password changing from Windows to
# update the Linux system password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
#        the encrypted SMB passwords. They allow the Unix password
#        to be kept in sync with the SMB password.
;  unix password sync = Yes
;  passwd program = /usr/bin/passwd %u
;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*

# Unix users can map to different SMB User names
;  username map = /etc/samba/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /etc/samba/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
        socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24

# Configure remote browse list synchronisation here
#  request announcement to, or browse list sync from:
#       a specific host or from / to a whole subnet (see below)
;   remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;   remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#       Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one  WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
        dns proxy = no

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
;  preserve case = no
;  short preserve case = no
# Default case is normally upper case for all DOS files
;  default case = lower
# Be very careful with case sensitivity - it can break things!
;  case sensitive = no

#============================ Share Definitions ==============================
[homes]
        comment = Home Directories
        browseable = no
        writeable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /home/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /home/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
        comment = All Printers
        path = /var/spool/samba
        browseable = no
# Set public = yes to allow user 'guest account' to print
        printable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba
;   public = yes
;   read only = yes
;   write list = @staff

# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765


[casa]
        path = /home/casa
        writeable = yes
        invalid users = %S
[root@linux samba]#

Desconectado Mr_X

  • Iniciado
  • *****
  • Mensajes: 2635
Para los conocedores de Samba
« Respuesta #3 en: 10 de Julio de 2005, 05:54:54 pm »
Asegúrate que el grupo de trabajo en Windows sea MYGROUP
¿casa es un usuario o es sólo un directorio que creaste después?

Haz los siguientes cambios en el archivo smb.conf:

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = MYGROUP

# server string is the equivalent of the NT Description field
server string = Samba Server

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
hosts allow = 192.168.1. 127.

# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = cups

# This option tells cups that the data has already been rasterized
cups options = raw

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# all log information in one file
# log file = /var/log/samba/smbd.log

# Put a capping on the size of the log files (in Kb).
max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.
# Use password server option only with security = server
; password server = <NT-Server-Name>

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
; encrypt passwords = yes
; smb passwd file = /etc/samba/smbpasswd
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd


# The following are needed to allow password changing from Windows to
# update the Linux system password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*

# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24

# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U

# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no

#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writeable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /home/netlogon
; guest ok = yes
; writable = no
; share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /home/profiles
; browseable = no
; guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
printable = yes

# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; read only = yes
; write list = @staff

# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765

[casa]
path = /home/casa
writeable = yes
invalid users = %S


Abre una terminal como root y da los siguientes comandos:
Código: [Seleccionar]
cat /etc/passwd | mksmbpasswd.sh > /etc/samba/smbpasswd
chmod 600 /etc/samba/smbpasswd


Ahora crea las contraseñas samba (repítelo para cada usuario):
Código: [Seleccionar]
smbpasswd usuario

Reinicia samba:
Código: [Seleccionar]
service smb restart

Y haz la prueba...
"... I'll wait I sow the seed, I set the scene and I watch the world go by..."

Desconectado cherry

  • Junior Member
  • **
  • Mensajes: 15
Mamentablemente me envia este Error
« Respuesta #4 en: 10 de Julio de 2005, 10:12:23 pm »
root@linux root]# cat /etc/passwd mksmbpasswd.sh > /etc/samba/smbpasswd
cat: mksmbpasswd.sh: No existe el fichero o el directorio
[root@linux root]#

Desconectado Mr_X

  • Iniciado
  • *****
  • Mensajes: 2635
Para los conocedores de Samba
« Respuesta #5 en: 10 de Julio de 2005, 11:01:09 pm »
Ok. Sáltate esa parte y sólo agrega los usuarios con smbpasswd ó smbadduser...
"... I'll wait I sow the seed, I set the scene and I watch the world go by..."

Desconectado cherry

  • Junior Member
  • **
  • Mensajes: 15
Para los conocedores de Samba
« Respuesta #6 en: 11 de Julio de 2005, 12:36:36 am »
Cita de: Mr_X
Ok. Sáltate esa parte y sólo agrega los usuarios con smbpasswd ó smbadduser...


[root@linux samba]# smbpasswd netone
New SMB password:
Retype new SMB password:
Mismatch - password unchanged.
Unable to get new password.
[root@linux samba]# smbpasswd netone
New SMB password:
Retype new SMB password:
getsmbfilepwent: malformed password entry for user root (uid not number)
getsmbfilepwent: malformed password entry for user bin (uid not number)
getsmbfilepwent: malformed password entry for user daemon (uid not number)
getsmbfilepwent: malformed password entry for user adm (uid not number)
getsmbfilepwent: malformed password entry for user lp (uid not number)
getsmbfilepwent: malformed password entry for user sync (uid not number)
getsmbfilepwent: malformed password entry for user shutdown (uid not number)
getsmbfilepwent: malformed password entry for user halt (uid not number)
getsmbfilepwent: malformed password entry for user mail (uid not number)
getsmbfilepwent: malformed password entry for user news (uid not number)
getsmbfilepwent: malformed password entry for user uucp (uid not number)
getsmbfilepwent: malformed password entry for user operator (uid not number)
getsmbfilepwent: malformed password entry for user games (uid not number)
getsmbfilepwent: malformed password entry for user gopher (uid not number)
getsmbfilepwent: malformed password entry for user ftp (uid not number)
getsmbfilepwent: malformed password entry for user nobody (uid not number)
getsmbfilepwent: malformed password entry for user vcsa (uid not number)
getsmbfilepwent: malformed password entry for user rpm (uid not number)
getsmbfilepwent: malformed password entry for user netdump (uid not number)
getsmbfilepwent: malformed password entry for user nscd (uid not number)
getsmbfilepwent: malformed password entry for user ident (uid not number)
getsmbfilepwent: malformed password entry for user sshd (uid not number)
getsmbfilepwent: malformed password entry for user rpc (uid not number)
getsmbfilepwent: malformed password entry for user rpcuser (uid not number)
getsmbfilepwent: malformed password entry for user nfsnobody (uid not number)
getsmbfilepwent: malformed password entry for user mailnull (uid not number)
getsmbfilepwent: malformed password entry for user smmsp (uid not number)
getsmbfilepwent: malformed password entry for user pcap (uid not number)
getsmbfilepwent: malformed password entry for user xfs (uid not number)
getsmbfilepwent: malformed password entry for user ntp (uid not number)
getsmbfilepwent: malformed password entry for user gdm (uid not number)
getsmbfilepwent: malformed password entry for user desktop (uid not number)
getsmbfilepwent: malformed password entry for user amanda (uid not number)
getsmbfilepwent: malformed password entry for user apache (uid not number)
getsmbfilepwent: malformed password entry for user named (uid not number)
getsmbfilepwent: malformed password entry for user webalizer (uid not number)
getsmbfilepwent: malformed password entry for user squid (uid not number)
getsmbfilepwent: malformed password entry for user postfix (uid not number)
getsmbfilepwent: malformed password entry for user mailman (uid not number)
getsmbfilepwent: malformed password entry for user postgres (uid not number)
getsmbfilepwent: malformed password entry for user canna (uid not number)
getsmbfilepwent: malformed password entry for user wnn (uid not number)
getsmbfilepwent: malformed password entry for user pvm (uid not number)
getsmbfilepwent: malformed password entry for user casa (uid not number)
getsmbfilepwent: malformed password entry for user ulp (uid not number)
Failed to find entry for user netone.
Failed to modify password entry for user netone
[root@linux samba]#

Desconectado Mr_X

  • Iniciado
  • *****
  • Mensajes: 2635
Para los conocedores de Samba
« Respuesta #7 en: 11 de Julio de 2005, 01:17:12 am »
Ok. Copia el siguiente código y guárdalo como mksmbpasswd.sh en /usr/bin/

Código: [Seleccionar]
#!/bin/sh
awk 'BEGIN {FS=":"
printf("#\n# SMB password file.\n#\n")
}
{ printf( "%s:%s:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:[UD         ]:LCT-00000000:%s\n", $1, $3, $5) }
'

Y haz:
Cita de: Mr_X

Abre una terminal como root y da los siguientes comandos:
Código: [Seleccionar]
cat /etc/passwd | mksmbpasswd.sh > /etc/samba/smbpasswd
chmod 600 /etc/samba/smbpasswd



Ahora crea las contraseñas samba (repítelo para cada usuario):
Código: [Seleccionar]
smbpasswd usuario

Reinicia samba:
Código: [Seleccionar]
service smb restart


Y no me respondiste

Cita de: Mr_X
¿casa es un usuario o es sólo un directorio que creaste después?
"... I'll wait I sow the seed, I set the scene and I watch the world go by..."

Desconectado kurtsik

  • Junior Member
  • **
  • Mensajes: 45
Para los conocedores de Samba
« Respuesta #8 en: 11 de Julio de 2005, 10:56:21 am »
Aupa.

Bueno, creo que tienes una pequeña liada con la configuracion de samba. Lo primero decirte que en el directorio /var/log tendras algun sitio en el que te guarda los mansajes de samba, es un buen principio para todo mirar lo que te dice el sistema, tanto cuando esta bien como cuando esta mal, asi seria tambien mas facil ayudarte.

Lo segundo, en el recurso compartido [casa] no hagas un usuario invalido todo el que se conecta  :wink: , quita la lines invalid users ......

Aqui tienes un smb.conf que funciona en SuSE sin hacer nada. Te he creado un ejemplo de recurso compartido llamado casa.

Para terminar un par de cosas, si tecleas como superusuario testparm -v testea la configuracion y si hay algun error de sisntaxis te lo chiva.

Antes de hacer nada tienes que añadir una contraseña de superusuario del servidor samba:

smbpasswd -w <pass>     que añadira un entrada en secrets.tdb en el directorio /etc/samba
Kurtsik
~~~ Hormarik gabeko mundu batean, nork behar ditu "leihoak"?? ~~~

Desconectado kurtsik

  • Junior Member
  • **
  • Mensajes: 45
Para los conocedores de Samba
« Respuesta #9 en: 11 de Julio de 2005, 11:00:11 am »
Ahora que me acuerdo, el sisema samba realmente consta de dos demonios smb y nmb, comprueba que tengas los corriendo:

# /etc/init.d/smb status
# /etc/init.d/nmb status
Kurtsik
~~~ Hormarik gabeko mundu batean, nork behar ditu "leihoak"?? ~~~

 

Aviso Legal | Política de Privacidad | Política de Cookies

el contenido de la web se rige bajo licencia
Creative Commons License